WinHex安装与使用

目录

下载WinHex

安装WinHex

查看现成的磁盘文件

手动创建磁盘文件

创建磁盘文件

创建分区

安装引导程序

查看磁盘

下载WinHex

下载链接：

WinHex: Hex Editor & Disk Editor, Computer Forensics & Data Recovery Software

安装WinHex

1).下载完成后出现winhex.zip文件，解压文件，放置到合适位置。如图为winhex.zip内的内容。

2).解压完成之后，直接以管理员方式直接打开winhex.exe文件即可。

查看现成的磁盘文件

        磁盘文件可以通过kvm、vmware、virtualbox等软件进行创建，但是需要将vmdk，qcow2等格式的自盘文件转换为raw格式。

[root@zyq images]# /home/zyq/qemu-img convert -p -O raw generic.qcow2 generic.raw    (100.00/100%)[root@zyq images]# [root@zyq images]# ll generic.* -h-rw------- 1 root root  21G Apr  6 08:54 generic.qcow2-rw-r--r-- 1 root root  20G Apr  6 17:49 generic.raw[root@zyq images]# ll generic.*   -rw------- 1 root root 21478375424 Apr  6 08:54 generic.qcow2-rw-r--r-- 1 root root 21474836480 Apr  6 17:49 generic.raw

查看转换格式后的磁盘文件

手动创建磁盘文件

1. 创建磁盘文件

   [root@zyq tmp]# dd if=/dev/zero of=/tmp/test.img bs=512 count=100000100000+0 records in100000+0 records out51200000 bytes (51 MB) copied, 0.0909236 s, 563 MB/s[root@zyq tmp]# ll test.img  -rw-r--r-- 1 root root 51200000 Apr  7 09:00 test.img[root@zyq tmp]# ll test.img -h-rw-r--r-- 1 root root 49M Apr  7 09:00 test.img

2. 创建分区

   [root@zyq tmp]# fdisk test.imgWelcome to fdisk (util-linux 2.23.2).Changes will remain in memory only, until you decide to write them.Be careful before using the write command.Device does not contain a recognized partition tableBuilding a new DOS disklabel with disk identifier 0xfd823fb1.Command (m for help): nPartition type:   p   primary (0 primary, 0 extended, 4 free)   e   extendedSelect (default p): Using default response pPartition number (1-4, default 1): First sector (2048-99999, default 2048): Using default value 2048Last sector, +sectors or +size{K,M,G} (2048-99999, default 99999): Using default value 99999Partition 1 of type Linux and of size 47.8 MiB is setCommand (m for help): wThe partition table has been altered!Syncing disks.[root@zyq tmp]# partprobe test.img[root@zyq tmp]# fdisk test.img -lDisk test.img: 51 MB, 51200000 bytes, 100000 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk label type: dosDisk identifier: 0xfd823fb1   Device Boot      Start         End      Blocks   Id  Systemtest.img1            2048       99999       48976   83  Linux

3. 安装引导程序

   [root@zyq tmp]# grub2-install test.imgInstalling for x86_64-efi platfORM.Installation finished. No error reported.

4. 查看磁盘

core.img占据的空间大小

2048*512/1024-0.5=1023.5Kbytes

来源地址：https://blog.csdn.net/zyqash/article/details/129990759