Windows 2008 故障转移群集验

背景:搭建基于windows Server 2008的故障转移群集
问题：验证群集配置时在验证配置向导中以下验证项目显示红色错误：

 

首先查看了technet里面对于该测试项目的解释，如下：

经过一段时间的等待，四个群集磁盘均不支持永久保留，并且此项测试失败后，剩余的项目则自动取消了。
通过搜索，查到以下内容：
验证 SCSI-3 永久保留
此测试可验证群集存储是否使用最新的（SCSI-3 标准）永久保留命令（它们与较旧的 SCSI-2 标准保留/释放命令不同）。永久保留命令可避免 SCSI 总线复位，这意味着它们与较旧的保留/释放命令相比，破坏性要小得多。因此，与运行早期版本操作系统的群集相比，故障转移群集在各种情况下的响应性更强。另外，磁盘不会永远处于一种不受保护的状态，这样就降低了发生卷损坏的风险。

SCSI-3 Persistent Reservation (SCSI-3 PR) supports device access from multiple systems, or from multiple paths from a single system. At the same time it blocks access to the device from other systems, or other paths.

VCS logic determines when to online a service group on a particular system. If the service group contains a disk group, the disk group is imported as part of the service group being brought online. When using SCSI-3 PR, importing the disk group puts reGIStration and reservation on the data disks. Only the system that has imported the storage with SCSI-3 reservation can write to the shared storage. This prevents a system that did not participate in membership arbitration from corrupting the shared storage.

SCSI-3 PR ensures persistent reservations across SCSI bus resets.

--------------------------------------------------------------------------------
Note   Use of SCSI 3 PR protects against all elements in the IT environment that might be trying to write illegally to storage, not only VCS related elements.
--------------------------------------------------------------------------------

IBM这样解释
（Http://publib.boulder.ibm.com/infocenter/clresctr/vxrx/index.jsp?topic=/com.ibm.cluster.rsct_5300_06.vsd.doc/bl506_undperr.html）
Persistent Reserve refers to a set of Small Computer Systems Interface-3 (SCSI-3) standard commands and command options which provide SCSI initiators with the ability to establish, preempt, query, and reset a reservation policy with a specified target device. The functionality provided by the Persistent Reserve commands is a superset of the reserve/release commands. The Persistent Reserve commands are not compatible with the legacy reserve/release mechanism, and target devices can only support reservations from either the legacy mechanism or the new mechanism. Attempting to mix Persistent Reserve commands with legacy reserve/release commands will result in the target device returning a reservation conflict error

总之，SCSI-3 PR就是一组SCSI命令集，用在多个系统访问一个共享存储的时候协调之用。并且于旧的命令集不兼容。Windows 2008用SCSI-3 PR，而Windows 2003用SCSI-2。当Windows 2003访问SCSI-3的共享存储的时候，会发生错误，MS KB911030解释了这个bug，http://support.microsoft.com/kb/911030

经过分析初步怀疑是存储设备的固件版本问题，今天下午将调整版本，有什么结果我会更新上来。

 

另外找到一些有用的参考资料：

http://blogs.technet.com/askcore/arcHive/2009/04/15/windows-2008-failover-cluster-validation-fails-on-validate-scsi-3-persistent-reservation.aspx

 

http://www.servercare.nl/Lists/Posts/Post.aspx?ID=71