扫码关注官方微信

扫码下载APP
返回顶部
首页 > 资讯 > 服务器 >docker machine安装极狐gitlab的过程详解
  • 445

0
分享到

docker machine安装极狐gitlab的过程详解

2024-04-02 19:04:59 445人浏览 泡泡鱼
摘要

目录1. 环境信息1.1 主机信息1.2 配置信息1.3 环境初始化1.4 升级内核1.5 安装 Docker1.6 安装 docker Machine2. 安装极狐gitlab2.

1. 环境信息

1.1 主机信息

主机用途
10.10.10.60极狐gitlab

1.2 配置信息

[root@localhost ~]# cat /etc/Centos-release
CentOS linux release 7.9.2009 (Core)
[root@localhost ~]# 
[root@localhost ~]# uname -r
3.10.0-1160.el7.x86_64
[root@localhost ~]# 
[root@localhost ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:           8004         208        7482           8         313        7548
Swap:          3967           0        3967
[root@localhost ~]# 
[root@localhost ~]# lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                2
On-line CPU(s) list:   0,1
Thread(s) per core:    1
Core(s) per Socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 141
Model name:            11th Gen Intel(R) Core(TM) i7-11800H @ 2.30GHz
Stepping:              1
CPU MHz:               2304.002
BoGoMIPS:              4608.00
Hypervisor vendor:     VMware
Virtualization type:   full
L1d cache:             48K
L1i cache:             32K
L2 cache:              1280K
L3 cache:              24576K
NUMA node0 CPU(s):     0,1
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl xtopology tsc_reliable nonstop_tsc eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3Dnowprefetch invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 arat avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq movdiri movdir64b md_clear spec_ctrl intel_stibp flush_l1d arch_capabilities
[root@localhost ~]#

1.3 环境初始化

echo "设置时钟同步"
yum install -y chrony
systemctl start chronyd.service
systemctl enable chronyd.service

echo "关闭防火墙"
systemctl stop firewalld
systemctl disable firewalld

echo "关闭 selinux"
setenforce 0
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
getenforce

echo "优化 ssh 登录速度"
sed -i 's/#UseDNS yes/UseDNS no/g' /etc/ssh/sshd_config
systemctl restart sshd

echo "安装基础软件 lrzsz, epel-release"
yum install epel-release lrzsz -y

1.4 升级内核

rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
# 安装ELRepo
rpm -Uvh Http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
# 载入elrepo-kernel元数据
yum --disablerepo=\* --enablerepo=elrepo-kernel repolist
# 查看可用的rpm包
yum --disablerepo=\* --enablerepo=elrepo-kernel list kernel*
# 安装长期支持版本的kernel
yum --disablerepo=\* --enablerepo=elrepo-kernel install -y kernel-lt.x86_64
# 删除旧版本工具包
yum remove kernel-tools-libs.x86_64 kernel-tools.x86_64 -y
# 安装新版本工具包
yum --disablerepo=\* --enablerepo=elrepo-kernel install -y kernel-lt-tools.x86_64

#查看默认启动顺序
awk -F\' '$1=="menuentry " {print $2}' /etc/grub2.cfg  

#默认启动的顺序是从0开始，新内核是从头插入（目前位置在0，而4.4.4的是在1），所以需要选择0。
grub2-set-default 0

reboot

当前最新稳定内核版本 CentOS Linux (5.4.180-1.el7.elrepo.x86_64) 7 (Core)

1.5 安装 docker

参考：Get Docker | Docker Documentation 或者

echo "
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1" >> /etc/sysctl.conf
sysctl -p

curl https://releases.rancher.com/install-docker/19.03.sh | sh
systemctl enable docker

设置国内源

vi /etc/docker/daemon.JSON
{
    "reGIStry-mirrors": ["https://hccwwfjl.mirror.aliyuncs.com"]
}
systemctl restart docker

其他源：http://hub-mirror.c.163.com，建议用这个 163 的

1.6 安装 docker machine

参考：Testing Environment | GitLab

$ curl -L https://GitHub.com/docker/machine/releases/download/v0.16.2/docker-machine-`uname -s`-`uname -m` >/usr/local/bin/docker-machine && \
  chmod +x /usr/local/bin/docker-machine

$ docker-machine version
docker-machine version 0.16.2, build bd45ab13

2. 安装极狐gitlab

参考官方文档：Testing Environment | GitLab

2.1 获取可用的极狐gitlab镜像tags

$ curl https://version.gitlab.cn/api/v1/versions
[{"id":138,"version":"15.1.2","major":15,"minor":1,"created_at":"2022-07-18T08:56:08.077+08:00"},{"id":137,"version":"15.1.1","major":15,"minor":1,"created_at":"2022-07-04T21:40:13.500+08:00"},{"id":136,"version":"15.0.4","major":15,"minor":0,"created_at":"2022-07-04T20:49:12.275+08:00"},{"id":135,"version":"14.10.5","major":14,"minor":10,"created_at":"2022-07-04T20:48:53.544+08:00"},{"id":134,"version":"15.1.0","major":15,"minor":1,"created_at":"2022-06-29T08:48:24.417+08:00"},{"id":133,"version":"15.0.3","major":15,"minor":0,"created_at":"2022-06-21T11:34:56.890+08:00"},{"id":132,"version":"14.10.4","major":14,"minor":10,"created_at":"2022-06-09T00:38:44.427+08:00"},{"id":131,"version":"15.0.2","major":15,"minor":0,"created_at":"2022-06-09T00:38:35.091+08:00"},{"id":130,"version":"14.9.5","major":14,"minor":9,"created_at":"2022-06-09T00:38:25.486+08:00"},{"id":129,"version":"14.10.3","major":14,"minor":10,"created_at":"2022-06-09T00:38:20.119+08:00"},{"id":128,"version":"15.0.1","major":15,"minor":0,"created_at":"2022-06-09T00:37:57.686+08:00"},{"id":127,"version":"15.0.0","major":15,"minor":0,"created_at":"2022-05-30T14:47:01.074+08:00"},{"id":126,"version":"14.9.4","major":14,"minor":9,"created_at":"2022-05-16T10:20:15.342+08:00"},{"id":125,"version":"14.10.2","major":14,"minor":10,"created_at":"2022-05-16T10:20:05.693+08:00"},{"id":124,"version":"14.8.6","major":14,"minor":8,"created_at":"2022-05-11T09:38:30.199+08:00"},{"id":123,"version":"14.10.1","major":14,"minor":10,"created_at":"2022-05-11T09:38:25.259+08:00"},{"id":122,"version":"14.10.0","major":14,"minor":10,"created_at":"2022-04-28T10:55:42.550+08:00"},{"id":121,"version":"14.9.3","major":14,"minor":9,"created_at":"2022-04-15T15:27:32.220+08:00"},{"id":120,"version":"14.7.7","major":14,"minor":7,"created_at":"2022-04-07T23:33:06.372+08:00"},{"id":119,"version":"14.8.5","major":14,"minor":8,"created_at":"2022-04-07T20:10:25.222+08:00"},{"id":118,"version":"14.9.2","major":14,"minor":9,"created_at":"2022-04-07T18:05:01.894+08:00"},{"id":117,"version":"14.7.6","major":14,"minor":7,"created_at":"2022-04-01T11:05:38.177+08:00"},{"id":116,"version":"14.9.1","major":14,"minor":9,"created_at":"2022-03-30T15:02:25.234+08:00"},{"id":115,"version":"14.7.5","major":14,"minor":7,"created_at":"2022-03-30T07:06:00.278+08:00"},{"id":114,"version":"14.9.0","major":14,"minor":9,"created_at":"2022-03-28T15:14:45.356+08:00"}]

2.2 设置环境变量

export SSH_PORT=2222
export HTTP_PORT=8888
export VERSION=15.1.2
export ENV_NAME=gitlab-test-env
export CONTAINER_NAME=gitlab-test-14.7.3

2.3 创建 docker host

docker-machine create \
--virtualbox-cpu-count -1 \
--virtualbox-memory 4096 \
--virtualbox-disk-size 30000 \
--driver virtualbox $ENV_NAME

会出现以下报错

Creating CA: /root/.docker/machine/certs/ca.pem
Creating client certificate: /root/.docker/machine/certs/cert.pem
Running pre-create checks...
Error with pre-create check: "VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path"

原因是未安装 VirtualBox，解决方法如下

Linux_Downloads – oracle VM VirtualBox

wget https://download.virtualbox.org/virtualbox/6.1.32/VirtualBox-6.1-6.1.32_149290_el7-1.x86_64.rpm
yum install -y VirtualBox-6.1-6.1.32_149290_el7-1.x86_64.rpm

必须使用 yum 安装 rpm 包，以便解决依赖

再次运行 docker-machine 创建命令，出现以下报错：

Running pre-create checks...
Error with pre-create check: "We support Virtualbox starting with version 5. Your VirtualBox install is \"WARNING: The vboxdrv kernel module is not loaded. Either there is no module\\n         available for the current kernel (5.4.180-1.el7.elrepo.x86_64) or it failed to\\n         load. Please recompile the kernel module and install it by\\n\\n           sudo /sbin/vboxconfig\\n\\n         You will not be able to start VMs until this problem is fixed.\\n6.1.32r149290\". Please upgrade at https://www.virtualbox.org"

按照提示执行命令 /sbin/vboxconfig

$ /sbin/vboxconfig
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
This system is currently not set up to build kernel modules.
Please install the GCc make perl packages from your distribution.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
    kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64
This system is currently not set up to build kernel modules.
Please install the gcc make perl packages from your distribution.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
    kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64

There were problems setting up VirtualBox.  To re-start the set-up process, run
  /sbin/vboxconfig
as root.  If your system is using EFI Secure Boot you may need to sign the
kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load
them. Please see your Linux system's documentation for more infORMation.

根据提示执行

yum install -y gcc make perl

# 会提示找不到 kernel-devel-5.4.180-1.el7.elrepo.x86_64
yum install -y kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64

原因是前面我们升级了内核到 5.4，内核太新了，重新使用默认 3.10 内核

#查看默认启动顺序
$ awk -F\' '$1=="menuentry " {print $2}' /etc/grub2.cfg  
CentOS Linux (5.4.180-1.el7.elrepo.x86_64) 7 (Core)
CentOS Linux (3.10.0-1160.el7.x86_64) 7 (Core)
CentOS Linux (0-rescue-5fe30f5d6bc041278a5ab7b332967cb0) 7 (Core)

#默认启动的顺序是从0开始，所以需要选择1。
grub2-set-default 1

reboot

重启后执行 /sbin/vboxconfig

$ uname -r
3.10.0-1160.el7.x86_64

$ /sbin/vboxconfig
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
This system is currently not set up to build kernel modules.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
    kernel-devel kernel-devel-3.10.0-1160.el7.x86_64
This system is currently not set up to build kernel modules.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
    kernel-devel kernel-devel-3.10.0-1160.el7.x86_64

There were problems setting up VirtualBox.  To re-start the set-up process, run
  /sbin/vboxconfig
as root.  If your system is using EFI Secure Boot you may need to sign the
kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load
them. Please see your Linux system's documentation for more information.

根据提示执行

yum install -y kernel-devel kernel-devel-3.10.0-1160.el7.x86_64

再执行 /sbin/vboxconfig

$ /sbin/vboxconfig
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.

成功编译进内核

再次执行 docker-machine，还是报错：

Running pre-create checks...
Error with pre-create check: "This computer doesn't have VT-X/AMD-v enabled. Enabling it in the BiOS is mandatory"

原因是 vm 未开启硬件虚拟化，关闭虚拟机，开启即可

图片此处省略

  • 勾选 虚拟化 Intel VT-X/EPT 或 AMD-V/RVI(V)

重启后再次运行 docker-machine，结果因为网络原因下载镜像失败

Running pre-create checks...
(gitlab-test-env) No default Boot2Docker ISO found locally, downloading the latest release...
(gitlab-test-env) Latest release for github.com/boot2docker/boot2docker is v19.03.12
(gitlab-test-env) Downloading /root/.docker/machine/cache/boot2docker.iso from https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso...
Error with pre-create check: "Get https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso: read tcp 10.10.10.60:38606->20.205.243.166:443: read: connection reset by peer"

解决方法很简单，先在合适网络下下载 https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso，然后把 boot2docker.iso 放到目录 /root/.docker/machine/cache/ 下即可

再次运行 docker-machine

$ docker-machine create \
> --virtualbox-cpu-count -1 \
> --virtualbox-memory 4096 \
> --virtualbox-disk-size 30000 \
> --driver virtualbox $ENV_NAME
Running pre-create checks...
Creating machine...
(gitlab-test-env) Copying /root/.docker/machine/cache/boot2docker.iso to /root/.docker/machine/machines/gitlab-test-env/boot2docker.iso...
(gitlab-test-env) Creating VirtualBox VM...
(gitlab-test-env) Creating SSH key...
(gitlab-test-env) Starting the VM...
(gitlab-test-env) Check network to re-create if needed...
(gitlab-test-env) Found a new host-only adapter: "vboxnet0"
Error creating machine: Error in driver during machine creation: Error setting up host only network on machine start: /usr/bin/VBoxManage hostonlyif ipconfig vboxnet0 --ip 192.168.99.1 --netmask 255.255.255.0 failed:
VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available)
VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp

解决方法如下：

1. docker-machine ls 的所有计算机
2. 用 docker-machine rm -y <machineName> 删除它们
3. 用 VBoxManage list hostonlyifs 查找所有 host-only 以太网适配器
4. 用 VBoxManage hostonlyif remove <networkName> 逐个删除它们
5. 创建 /etc/vbox 文件夹
6. 写入文件 echo "* 0.0.0.0/0 ::/0" > /etc/vbox/networks.conf

这种解决方法可能会导致启动 docker 机器时 Waiting for an IP...会花费多一点时间

再次创建 host，正常运行了

$ docker-machine create \
> --virtualbox-cpu-count -1 \
> --virtualbox-memory 4096 \
> --virtualbox-disk-size 30000 \
> --driver virtualbox $ENV_NAME
Running pre-create checks...
Creating machine...
(gitlab-test-env) Copying /root/.docker/machine/cache/boot2docker.iso to /root/.docker/machine/machines/gitlab-test-env/boot2docker.iso...
(gitlab-test-env) Creating VirtualBox VM...
(gitlab-test-env) Creating SSH key...
(gitlab-test-env) Starting the VM...
(gitlab-test-env) Check network to re-create if needed...
(gitlab-test-env) Found a new host-only adapter: "vboxnet0"
(gitlab-test-env) Waiting for an IP...
Waiting for machine to be running, this may take a few minutes...
Detecting operating system of created instance...
Waiting for SSH to be available...
Detecting the provisioner...
Provisioning with boot2docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Checking connection to Docker...
Docker is up and running!
To see how to connect your Docker Client to the Docker Engine running on this virtual machine, run: docker-machine env gitlab-test-env

$ docker-machine ls
NAME              ACTIVE   DRIVER       STATE     URL                         SWARM   DOCKER      ERRORS
gitlab-test-env   -        virtualbox   Running   tcp://192.168.99.100:2376           v19.03.12

2.4 连接到 docker host

eval "$(docker-machine env ${ENV_NAME})"

如果需要长期使用可以添加到配置文件：echo 'eval "$(docker-machine env gitlab-test-env)"' >> ~/.bash_profile

查看是否生效

docker info
Client:
 Debug Mode: false

Server:
 Containers: 0
  Running: 0
  Paused: 0
  Stopped: 0
 Images: 0
 Server Version: 19.03.12
 Storage Driver: overlay2
  Backing Filesystem: extfs
  Supports d_type: true
  Native Overlay Diff: true
 Logging Driver: json-file
 Cgroup Driver: cgroupfs
 Plugins:
  Volume: local
  Network: bridge host ipvlan macvlan null overlay
  Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog
 Swarm: inactive
 Runtimes: runc
 Default Runtime: runc
 Init Binary: docker-init
 containerd version: 7ad184331fa3e55e52b890ea95e65ba581ae3429
 runc version: dc9208a3303feef5b3839f4323d9beb36df0a9dd
 init version: fec3683
 Security Options:
  seccomp
   Profile: default
 Kernel Version: 4.19.130-boot2docker
 Operating System: Boot2Docker 19.03.12 (TCL 10.1)
 OSType: linux
 Architecture: x86_64
 CPUs: 2
 Total Memory: 3.852GiB
 Name: gitlab-test-env
 ID: AFYU:KGWR:RTE4:FG6E:ZYSC:2TUX:CYRC:3RJW:KDUE:OPZM:KJL2:LMDR
 Docker Root Dir: /mnt/sda1/var/lib/docker
 Debug Mode: false
 Registry: https://index.docker.io/v1/
 Labels:
  provider=virtualbox
 Experimental: false
 Insecure Registries:
  127.0.0.0/8
 Live Restore Enabled: false
 Product License: CommUnity Engine

可以看到 Name 是 gitlab-test-env，证明已生效

2.5 创建极狐gitlab容器

export IP=$(docker-machine ip $ENV_NAME)

docker run -d \
--env GITLAB_OMNIBUS_CONFIG="external_url 'http://$IP:$HTTP_PORT'; gitlab_rails['gitlab_shell_ssh_port'] = $SSH_PORT;" \
--hostname $IP \
-p $HTTP_PORT:$HTTP_PORT -p $SSH_PORT:22 \
--name $CONTAINER_NAME \
registry.gitlab.cn/omnibus/gitlab-jh:$VERSION

$ docker ps
CONTAINER ID        IMAGE                          COMMAND             CREATED             STATUS                                 PORTS                                                           NAMES
87d83d00755d        gitlab/gitlab-ee:14.7.3-ee.0   "/assets/wrapper"   3 minutes ago       Up About a minute (health: starting)   80/tcp, 443/tcp, 0.0.0.0:8888->8888/tcp, 0.0.0.0:2222->22/tcp   gitlab-test-14.7.3

2.6 访问极狐gitlab

首先获取 docker host 虚拟机 ip

$ echo $IP
192.168.99.100

# 获取 root 账号初始密码
docker exec ${CONTAINER_NAME} cat /etc/gitlab/initial_root_passWord

访问 http://192.168.99.100:8888 即可看到极狐gitlab页面

到此这篇关于docker machine安装极狐gitlab的文章就介绍到这了,更多相关docker安装gitlab内容请搜索编程网以前的文章或继续浏览下面的相关文章希望大家以后多多支持编程网！

--结束END--

本文标题: docker machine安装极狐gitlab的过程详解

本文链接: https://lsjlt.com/news/164581.html(转载时请注明来源链接)

有问题或投稿请发送至: 邮箱/279061341@qq.com    QQ/279061341

猜你喜欢
  • docker machine安装极狐gitlab的过程详解
    目录1. 环境信息1.1 主机信息1.2 配置信息1.3 环境初始化1.4 升级内核1.5 安装 docker1.6 安装 docker machine2. 安装极狐gitlab2....
    99+
    2024-04-02
  • Docker安装logstash的详细过程
    编辑docker-compose.yml，内容如下： version: '3' services: logstash02: image: logstash:6.4.1...
    99+
    2024-04-02
  • docker安装elastic search的详细过程
    1. ELASTICSEARCH 1、安装elastic search dokcer中安装elastic search （1）下载ealastic search和kibana do...
    99+
    2024-04-02
  • 详细介绍GitLab的安装和配置过程
    在当今的软件开发领域，版本控制是一项非常重要的工作，而Git是这个领域中最为流行的版本控制系统之一。但是，为了更好地管理自己的项目，还需要搭建一套Git服务器来进行代码的提交和管理。其中，GitLab就是一个极好的选择。本文将详细介绍Git...
    99+
    2023-10-22
  • docker安装部署 onlyoffice的详细过程
    0. 系统要求 中央处理器 I5-10400F以上 内存 16 GB,最佳32G内存 硬盘 至少40 GB的可用空间 1：安装Docker Desktop 2：进入BIOS设置CPU...
    99+
    2024-04-02
  • Docker安装Jenkins-2.249.3-1.1的详细过程
    目录一、安装Docker二、拉取Jenkins镜像文件三、创建挂载目录并授权四、创建并启动Jenkins容器五、查看jenkins是否启动成功六、查看docker容器日志七、访问Je...
    99+
    2024-04-02
  • 详解gitlab的安装教程（centos系统）
    在Linux服务器上，GitLab是一种必备工具，它提供了一个托管代码、项目管理和版本控制的平台。通过GitLab，你可以轻松地部署、存储和管理你的代码，以及进行协作开发。本文将向你展示如何在CentOS上安装GitLabCE的过程。前置条...
    99+
    2023-10-22
  • Docker安装Presto连接Hive的详细过程
    1、简介 Presto 是一个开源分布式 SQL 查询引擎，用于针对从千兆字节到 PB 级的各种规模的数据源运行交互式分析查询。Presto 允许查询数据所在的位置，包括 Hive、...
    99+
    2024-04-02
  • Ubuntu20.04上安装和使用Docker的详细过程(安装包)
    目录一、解压文件二、拷贝解压后的文件到/usr/bin/下面三、加入系统文件四、启动Docker五、Docker配置文件六、重启Docker七、检查Docker是否安装成功八、总结安...
    99+
    2024-04-02
  • docker安装RabbitMQ及安装延迟插件的详细过程
    目录1.首先说一下什么是MQ1.1为什么要用MQ/MQ有什么用1.1.1流量消峰1.1.2应用解耦1.1.3异步处理2.安装RabbitMq2.1首先拉取镜像2.2启动镜像2.3启动...
    99+
    2024-04-02
  • Docker-compose安装的全过程
    目录docker compose1.docker compose安装1).升级内核2).安装docker3).利用安装包下载安装docker-compose4).或者利用pip下载安...
    99+
    2023-03-07
    Docker-compose安装 Docker-compose 安装Docker-compose
  • Hadoop的安装过程详解
    本篇内容主要讲解“Hadoop的安装过程详解”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“Hadoop的安装过程详解”吧!安装JDK解压jdk压缩包 tar -zxvf&nb...
    99+
    2023-06-03
  • Neo4j安装过程详解
    在安装neo4j之前，需要安装Java JRE，并配置Java开发环境，然后安装neo4j服务。 一、CentOS下安装 1.下载Neo4j 去官网下载最新的neo4j，选择社区版。地址：https://neo4j.com/download...
    99+
    2020-03-30
    Neo4j安装过程详解
  • OpenStack 安装 Keystone的过程详解
    目录OpenStack 安装 Keystone1.OpenStack 官网2.KeyStone 概述3.安装 OpenStack packages4.Network Time Pro...
    99+
    2024-04-02
  • Windows下Docker安装各种软件的详细过程
    一 安装Mysql # docker 中下载 mysql docker pull mysql #启动 docker run --name mysql -p 3306:3306...
    99+
    2024-04-02
  • 亲手教你Docker Compose安装DOClever的详细过程
    目录一、Docker Compose是什么以及Docker Compose安装和使用二、DOClever是什么三、使用Docker Compose安装DOClever步骤一、Dock...
    99+
    2024-04-02
  • IntelliJ IDEA(2018版)安装docker插件的详细过程
    目录一、开发环境二、安装docker插件1、Idea内安装2、下载安装包安装三、Spring Boot 服务docker部署1、新建一个Spring Boot工程2、配置Docker...
    99+
    2024-04-02
  • Win10安装dlibGPU过程详解
    安装cmake，命令： pip install cmake 安装VS 选择C++的桌面开发和python开发 给cl.exe配置环境变量。 我的cl.exe目录是：C:\P...
    99+
    2024-04-02
  • docker安装rocketMQ和安装过程中出现问题的解决
    目录拉取rocketmq镜像 创建namesrv 创建单个broker节点 rocketMQ-console服务 本文主要介绍安装rocketMQ4.4.0，主要分为四步，分别为： ...
    99+
    2024-04-02
  • Android 应用的安装过程详解
    Android 应用安装过程： 首先一个android项目，然后编译和打包，将.java文件编译为.class，.class编译为.dex，将所有文件打包为一个apk，只编译...
    99+
    2022-06-06
    安装 Android
软考高级职称资格查询
热门wiki
近期文章
推荐阅读
热门问答
热门标签
编程网，编程工程师的家园，是目前国内优秀的开源技术社区之一，形成了由开源软件库、代码分享、资讯、协作翻译、讨论区和博客等几大频道内容，为IT开发者提供了一个发现、使用、并交流开源技术的平台。

  • 官方手机版

  • 微信公众号

  • 商务合作